- FastFix sanding pad Ø 125 mm (soft-HT)
- Festool PROTECTOR
- in SYSTAINER SYS 2 T-LOC
The ROTEX RO 125. Lightens the load of your tool kit while increasing the range of applications. With just one tool for an extremely high material removal rate during coarse sanding. A super-fine image when fine sanding. And a perfect finish when polishing. When combined with the GRANAT abrasive, the ROTEX saves money not only thanks to the low purchase price, but also thanks to the minimal use of abrasives. And with the appropriate mobile dust extractor, it even saves you the effort of brushing the work surface. And, since it is based on many ergonomic studies, the RO 125 with its compact housing and soft-grip gripping surfaces more or less incidentally fits perfectly in your hand.
- A powerful motor and combination of eccentric and orbital motion removes material three times faster than conventional eccentric sanders
- Three tools in one for coarse sanding, fine sanding and polishing
- Healthy, efficient dust extraction with the Jetstream principle
- FastFix sanding pad system, tool-less
- Compact, lightweight and handy for non-tiring work
- Eccentric motion for high-quality, scratch-free surfaces
- Sanding up to the edge thanks to the Festool PROTECTOR
- Ideal ergonomic grip positions
- ROTEX rotary motion for efficient material removal
Achieve ideal results more quickly:
Three tools in one – for coarse sanding, fine sanding, polishing and as a delta sander. Pads can be changed quickly and without tools thanks to FastFix.
Convenient and safe:
Compact, handy and, thanks to its low weight, ideal for overhead work.
Systems get it done:
The right tool for any surface application – sanding pads in a range of hardnesses and abrasives which are perfectly adapted to the pad and extraction.
Cost-efficient 3-in-1 principle
Three tools in one. By using the ROTEX, you can perfrom three different operations without changing devices: Coarse sanding, fine sanding and polishing. Just flip the switch to another setting and you're ready to go.
Coarse sanding
Maximum material removal with the RTEX rotary motiom: The displaced eccentric/rotational motion removes large quantities of material in on time at all.
Fine sanding
The classic eccentric motion for intermediate and fine sanding. Extra-fine sanding finish, excellent surface quality
Polishing
The ROTEX rotary motion combined with Festool polishess and polishing sponges produce gleaming results without heating the surface significantly
Removes up to three times more material
The high - performance ROTEX motor and the combination of eccentric and rotarry motion removes significantly more material than a conventional random orbit sander. Durable eccentric bearings extend the service life of the machine
Protects the sanding pad and workpiece
Sand safely against abutting edges without the rick of kickback with the Festool PROTECTOR
Effective sanding pad brake
The sanding pad brake prevents the sanding pad from turning upwards. It prevents the surface being scratched during sanding and eliminaes the need for rework.
changing pads without using tools.
Simple, fast and safe. FastFix interface for changing sanding and polishing pads quickly without using tools. This means that you can respond to changing tasks and material requirements.
Faster abrasive changes
Achieving the perfect surface quality depends on the smakkest of details. Festool abrasives are therefore quickly replaced using the practical StickFix system, and adhere reliably and without slipping
Healthy and dust-free
Optimum dust extraction wiith the established Jetstream principle. For less dust and for generating less heat and for ensuring that the abrasive and fastener do not clog as readily
Because clean is simply healthier
Clean workplace with the Festool mobile dust extractors from the CT series. Compact and lightweight, ideal for assembly tasks and the perfect companion for the ROTEX RO 125.
Pure eccentric motion and ROTEX rotary Motion
The eccentric motion alone guarantees a smooth sanding pattern. if the rotational motion is added to this, ou achieve a high rate of material removal in coarse sanding and an extraordinary degree of glass when polishing high-gloss surfaces.
Working with the material in mind.
Different materials, different requirements: You can use the MMC electronics to control smooth start-up, overheating protection and infinitely variable speed adjustment.
Main applications
- Sanding off old paint and varnish
- Sanding wooden materials
- Renovation work such as sanding steps
- Preliminary and coarse sanding of repair compound
- Hologram-free polishing
- Working on vertical surfaces
MPE sanding pad
Sanding pads and sanding discs made from extremely durable materials for long service life.
Plug it
Removable, replaceable mains cable with safety lock for quick conversion.
CLEANTEC
Integrated bayonet fitting as the connecting element between the extractor and the tool.
Protector
Protects the sanding pad and material when working close to edges.
MMC Multi Material Control electronics
“Multi Material Control” power electronics with constant adjustable speed and temperature monitor for work on all types of material.
Antistatic function
Mobile dust extractors and tools with the antistatic function to prevent static charge from accumulating when working.
FastFix
Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
StickFix STF
Quick, economical fastening system for abrasives – no adhesives, no clamping.
Jetstream principle
The 9-hole principle for reduced dust accumulation, less heat and less clogging. Up to a 30 % longer service life.
